Working loads up to 32 tons

Safe, compact, reliable and low-maintenance: with the SH 6080, the advantages of the SH wire rope hoist programme are now also available for safe working loads up to 32,000 kg. Thanks to the proven module system of the SH programme, the strong all-rounder can be adapted to a wide variety of requirements.

The largely maintenance-free components of the SH range lend the SH 6080 wire rope hoist a high classification in accordance with FEM/ISO standards. The basic version of the SH 6080 wire rope hoist is classified according to ISO M4. For higher speeds, the SH 6080 is available with classification according to ISO M3. For more frequent use at a lower workload, the SH 6080 is available in a higher classification group in each case.

The module system means the SH 6080 wire rope hoist can be adapted to individual customer requirements: for example, all wire rope hoists are available with a lifting height of 6 to 30 metres, and track gauges of 1,400 to 4,000 mm are possible for double-rail crabs. For environments with gases and vapours, the SH 6080 wire rope hoist comes in an explosion-proof version for Zone 2. The strict ATEX directives and IECEx regulations for mechanical and electrical explosion protection are naturally fulfilled. Safety components such as gear-type limit switches, temperature monitoring of the motors and overload safety devices increase work safety.

  • Largely maintenance-free, low wear, long service life according to FEM/ISO standards
  • Lifting heights from 6 to 30 metres available
  • Overhead trolleys available in track gauges from 1,400 to 4,000 mm
  • High-quality safety components as standard for improved work safety
  • Optionally available in explosion-proof design for Zone 2 according to ATEX and IECEx

Technology

  • SH 钢丝绳葫芦的剖面视图,这种钢丝绳葫芦的突出特点是具有高质量的部件,如油漆、控制器、电机、起重机、电机、制动器、绳索和钢丝绳导向器、过载保护装置和钢丝绳驱动。

    The SH wire rope hoist programme boasts superior technology. The largely maintenance-free components of the modular wire rope hoist are matched to each other optimally. They guarantee constant performance, long service life and high efficiency.

  • 位于钢丝绳卷筒(带钢丝绳)上的导绳器环的特写。

    Rope and rope guide

    • Highly flexible special rope with long service life
    • Field-proven enclosed rope guide in spheroidal graphite cast iron has no temperature limitations
    • The GJS material (previously designated GGG 40) is suitable for highest and lowest temperature ranges
    • 360° rope tensioner prevents the formation of rope slack
  • SH 钢丝绳葫芦的部件颜色为绿色、黑色和黄色

    Paint

    • Standard paint treatment as per RAL 6018 yellow-green and RAL 7021 black grey
    • High-quality primer and top coats for standard applications
    • Off-standard paint treatment for outdoor use or corrosive ambient conditions
    • Shade as per customer’s requirement
  • 位于负载绳悬挂处的负载传感器

    Overload cut-off

    • Permanent electronic monitoring of the suspended loads
    • Limitation of the maximum load by load measurement at the rope anchorage possible in the case of multiple reeving
  • SH 钢丝绳葫芦齿轮箱内部齿轮的特写

    Hoist gear

    • All gear stages with lifetime lubrication in oil bath
    • Modern technology ensures quiet operation
  • 打开 SH 钢丝绳葫芦的开关盒显示了控制及电机管理模块

    SLE/SMC control and motor management

    • Condition monitoring as standard
    • Inching operation is suppressed to reduce stress on equipment
    • All common control voltages available
    • High degree of safety due to oversized contactors
    • Temperature monitoring of the hoist motor and travel motor
  • SH钢丝绳葫芦(带风扇叶轮)的葫芦电机制动器的特写

    Brake

    • Low-maintenance, asbestos-free brake needs no adjustment
    • Long service life thanks to oversized brake
    • Brake easily accessible for inspection from outside
    • Motor management ensures low wear
    • IP65 protection, IP66 optional
  • SH 钢丝绳葫芦(带风扇叶轮)的葫芦电机制动器的特写

    Motor

    • Special-purpose motor for hoisting applications
    • Classification according to FEM/ISO standards, high-duty-cycle and switching operation frequency motor
    • IP55 protection, IP66 optional, thermal class F
    • Motor outside rope drum, highly efficient motor cooling, maintenance-friendly
    • Temperature control by PTC thermistors
  • 黄色部分是 SH 钢丝绳葫芦吊钩模块

    Rope drive

    • Optimised ratio of drum-to-sheave diameter ensures low wear on rope
    • Flexible and long-lasting wire rope
    • Wear-resistant return sheaves, fine machining provides rope-friendly grooves in rope drum
    • Drum easily accessible for rope replacement
    • Robust bottom hook block with low headroom in spite of large dimensioning of hook

Options and features

Although they are already first-class in their standard design, you can make the hoists even safer, more economical and more convenient with a range of mechanical, electrical and electronic options. They simultaneously improve performance, prolong service life and make it possible to adapt the hoist individually to specific requirements.

Here are some of the options frequently used.

  • Rotes Steuergerät mit NOT-HALT Schlagtaster.

    Control pendant

    • Robust control pendant with EMERGENCY STOP palm button and control cable
    • All switching elements for hoist, cross, and long travel are 2-step
    • IP65 protection
    • Additional buttons, such as horn activation, can be easily fitted
  • Drei verschiedene Funkfernsteuergeräte als Drucktastengerät und ein Joysticksender in Meisterschalterausführung.

    Radio remote control units

    • Flex-Wave pushbutton unit with protective cover and carry strap
    • VUE pushbutton units with feedback display
    • MLTX2 joystick transmitter with controller and carry strap
    • Optional battery chargers with standard rechargeable batteries
    • Robust, fibre-reinforced plastic housing, IP66 protection
    • Frequency ranges 433, 863 or 2,400 kHz
    • Also available in explosion-proof version
    • Other radio remote control units optionally available on request
  • Getriebeendschalter im Steuerungskasten

    Emergency hoist limit switch (gear limit switch)

    • As standard, the hoist is equipped with a geared limit switch for top and bottom hook position and an operational limit switch for top hook position
    • As an option, up to eight switching elements can be fitted to the switch. This permits further stopping positions and operational limiting in bottom hook position
  • Multicontroller SMC für permanente Lastüberwachung

    SMC Multicontroller

    • Continuous load monitoring by overload cut-off even if hoist is idling
    • Overload protection with ALC automatic load control
    • Load spectrum memory for load-related operating time summation
    • Operating data registration, e.g. operating hours, load spectrum, motor switching operations and load cycles
    • Data exchange with PC possible
  • Fahrendschalter für die Befestigung am Katzfahrwerk.

    Travel limit switch

    • Travel limit switch on crab available as option
    • Limiting for both directions of travel
    • Switchover from “fast/slow” (predisconnect)
    • Switch contacts designed for control current
    • IP66 protection
  • Large-format load indicator with luminous red digits.

    Load display

    • SLD four-digit 7-segment load display, large format, luminous red
    • Available with various interfaces including CAN
    • Choice of 100 or 150 mm digit height
    • Combinable with the hoist’s overload sensor and the SMC multicontroller available as an option, no additional fixtures or load attachment devices are required, the headroom of the hoist remains unchanged
  • Verschiedene optische Signalgeber.

    Signal transmitters

    • Visual and acoustic signal transmitters such as horn and flashing light can be mounted on trolleys
    • Signal transmitters can be activated by a button on the control pendant
  • Handlüftung der Hubwerksbremse eines Seilzugs SH von STAHL CraneSystems.

    Manual venting of hoist brake

    • The brake release device permits the hoist brake to be released manually, allowing the load to be lowered during a loss of power
    • As an option, every hoist can be equipped with this supplementary equipment to the standard brake
  • Frequency inverters

    Frequency inverters for “lifting” and “travelling”

    • Smooth starting and braking characteristics
    • Load swing greatly reduced
    • Fast, precise positioning of the load, corrective switching operations rarely necessary
    • The reduced dynamic load means longer service life for all components
    • Worldwide approvals for all frequency inverters

资料下载

手册

SH 钢丝绳电动葫芦

24页

07.2021

产品信息

Wire rope hoists –
SH, AS

216 pages

07.2018

产品信息

Wire Rope Hoists Ex – SH, AS

196 pages

05.2015 | Rev. 04.2016

产品剖面图

The wire rope hoist SH

1 page

12.2021

海报

The wire rope hoist SH

80 x 60 cm

12.2021

更多展信息

STAHL CraneSystems 的 SH 钢丝绳葫芦是世界上顶尖的葫芦之一。它经过几千次实践考验,应用于各种不同场合,低维护率且有惊人的使用寿命。来自于德国的完美起重机技术。

SH 钢丝绳葫芦

全方位的钢丝绳葫芦其安全工作负荷可以高达 25,000 公斤。模块化的设计以及个性化的适应性,可以满足最高的起重要求。

 SH 钢丝绳葫芦

AS 7 钢丝绳葫芦最高额定载荷可达 80,000 kg。AS 7 钢丝绳葫芦相当稳固且归功于它紧凑的结构使得在系统和有限空间中理想地应用。

AS 7 钢丝绳葫芦

强大的起重平台,保证了工作载荷下的高度安全。紧密的尺寸,坚固的工程,是要求较高环境下的最佳选择方案。

 AS 7 钢丝绳葫芦

即使在极端条件下,坚固的绞车也能确保高性能。紧凑、使用寿命长且经济。

SHW 8 卷扬机

卷扬机的功能较强大,即便在极端条件下也能够实现超高的性能。紧凑,耐用,经济。

 SHW 8 卷扬机

STAHL CraneSystems 公司在防爆钢丝绳葫芦的制造方面精益求精:公司拥有自主的研发和制造流程,并且通过了国际认证。公司在这方面积累了 140 多年的丰富经验。

钢丝绳葫芦 Ex | 绞车 Ex

防爆钢丝绳葫芦和绞车通过 ATEX 和 IECEx 认证,适用于 1 区、2 区以及 21 区或 22 区。

 钢丝绳葫芦 Ex | 绞车 Ex

双驱动 TDC 概念满足了 DIN EN 14492-2 对运输熔融金属的所有要求。有 TDC 设计的钢丝绳葫芦适用于铸造厂和化工厂。

TDC 双驱动概念

最高的冗余安全性能,例如,在熔融金属运输过程中。采用标准的系列制造流程。

 TDC 双驱动概念

来自STAHL CraneSystems的 LNG 葫芦专门为 LNG 工厂的维护进行设计。葫芦的冗余设计在危险的区域提供了双重安全保护。

LNG 钢丝绳葫芦

用于液化天然气储罐和 LNG 终端的工程解决方案,分四个安全等级。

 LNG 钢丝绳葫芦

在英国,很多的 ST 型环链葫芦被用于铁路轨道的维护和更换。

工程技术

工程师和技术人员从很大的产品系列中开发独特的非标解决方案和专用解决方案。

 工程技术