There are standard contactor controls available for all common control voltages for crane systems with components from STAHL CraneSystems. In their basic version, the components are supplied with plug connections as far as this is technically possible and meets requirements. The standard equipment can be supplemented individually with various control and monitoring components as well as optional frequency inverters for hoists and travel drives to suit your specific application. This equipment will increase safety in material handling and lengthen the service life of the system.
起重机电气
Premium products you can trust
-
Cable power supply systems
- Delivery complete with galvanised C-rail, mounting hardware, cantilever arms for clamping, cable trolley, cables and terminal box
-
Plastic bus bar
- Delivery complete in straight sections, including mounting and connection hardware, current collector trolley
-
Radio remote control units
- Flex-Wave pushbutton unit with protective cover and carry strap
- VUE pushbutton units with feedback display
- MLTX2 joystick transmitter with controller and carry strap
- Optional battery chargers with standard rechargeable batteries
- Robust, fibre-reinforced plastic housing, IP66 protection
- Frequency ranges 433, 863 or 2,400 kHz
- Also available in explosion-proof version
- Other radio remote control units optionally available on request
-
Controls
- KSG distributed control: lifting and cross travel on the crab, long travel at the crane bridge
- KSK complete control: all electrical devices in a panel box, for universal use
- 2 speeds
- IP 55 protection
- Temperature range –20 °C to +40 °C
-
Control pendant
- Robust control pendant with EMERGENCY STOP palm button and control cable
- All switching elements for hoist, cross, and long travel are 2-step
- IP65 protection
- Additional buttons, such as horn activation, can be easily fitted
-
Load display
- SLD four-digit 7-segment load display, large format, luminous red
- Available with various interfaces including CAN
- Choice of 100 or 150 mm digit height
- Combinable with the hoist’s overload sensor and the SMC multicontroller available as an option, no additional fixtures or load attachment devices are required, the headroom of the hoist remains unchanged
-
Frequency inverters for “lifting” and “travelling”
- Smooth starting and braking characteristics
- Load swing greatly reduced
- Fast, precise positioning of the load, corrective switching operations rarely necessary
- The reduced dynamic load means longer service life for all components
- Worldwide approvals for all frequency inverters
