RadioMOVEit – safe, ergonomic lifting
Crane technology specialist STAHL CraneSystems presents the RadioMOVEit, a new type of chain hoist control unit mounted directly on the chain. The operator can guide the load safely using the two non-slip handles, while controlling all the chain hoist functions without moving his hands. It is suitable for both right-hand and left-hand operation. If greater heights of lift are required, the control unit can be removed from its cradle and used as a conventional radio remote control.
The RadioMOVEit is attached to the load chain with two screws and can easily be adjusted to the desired working height. It is just as easy to remove it whenever the full height of lift of the chain hoist is required.
As there is no conventional cable-based control switch, the RadioMOVEit opens up a new ergonomic method of working with greater freedom of movement, simultaneously improving safety in the workplace.
The radio control can be used with all chain hoists from STAHL CraneSystems. On newer models the radio receiver just needs to be connected to the control, older models can easily be retrofitted with the necessary connection.
69 radio channels are available and allow more than one RadioMOVEit to be operated safely in the same room. The control unit has an emergency stop function and is approved in category 3 in compliance with EN 954-1.
The scope of supply comprises the RadioMOVEit with the appropriate radio receiver and charger – when fully charged, the remote control is equipped for 30 hours' continuous operation. The RadioMOVEit is available as of now from specialist dealers and crane manufacturers.