Lifting bulky loads without obstruction

The Big Bag version, a special variant of the STD dual chain hoist, is designed for safe working loads up to 3,200 kg. Its special features are the freely selectable distance between chain hoist and load hook as well as lifting of bulky loads up to the highest hook position without obstructing edges such as trolley, chain hoist or chain box getting in the way.

The chain hoists are also available in explosion-proof design for Zone 1, Zone 21 and Zone 22.

  • Freely selectable distance to load hook
  • Lifting to the highest hook position without obstruction
  • Low headroom for low buildings
  • Safe working load to 3,200 kg
  • Based on the popular STD dual chain hoist and tried-and-tested ST series
  • Optionally available in explosion-proof design
  • The special design of the Big Bag chain hoists allows lifting of lifting beams without obstructing edges getting in the way.

    The special design of the Big Bag chain hoists allows lifting of lifting beams without obstructing edges getting in the way.

  • The short headroom trolley with extended rope lead-off is available for safe working loads of 500 kg to 3,200 kg.

    The short headroom trolley with extended rope lead-off is available for safe working loads of 500 kg to 3,200 kg.

  • Thanks to the freely selectable distance between chain hoist and loak hook, STB chain hoists also lift bulky loads up to the highest hook position.

    Thanks to the freely selectable distance between chain hoist and loak hook, STB chain hoists also lift bulky loads up to the highest hook position.

Models

The different models and trolley variants allow not only a wide variety of uses, but also very individualised solutions tailored to specific requirements.

  • Diagram of the STB Big Bag chain hoist. It lifts bulky loads to the highest hook position.

    The Big Bag version is designed for load capacities up to 3,200 kg. Its special feature is the free choice of the distance between chain hoist and load hook which makes lifting bulky loads or Big Bags up to top hook position possible without hindering edges such as trolley, chain hoist or chain box.

Type Load capacity up to [kg] Short head­room trolley Extra short head­room trolley Dual chain hoist Vario dual chain hoist Big Bag
ST 05 125 – 630 0 0 0 1 2
ST 10 500 – 1,000 0 2 0 1 0
ST 20 1,000 – 2,000 0 2 2 1 2
ST 30 1,250 – 3,200 0 0 0 1 0
ST 32 1,250 – 3,200 0 2 2 2 2
ST 50 2,500 – 5,000 0 0 0 1 0
ST 60 3,200 – 6,300 0 1 0 1 2
Standard    Option    Not available

Technology

  • Diagram of the ST chain hoist and its technical assembly.

    The ST chain hoist programme boasts superior technology. The low-maintenance components of the modular chain hoist are optimally matched to each other. They guarantee constant performance, long service life and high efficiency.

  • Chain hoist motor from STAHL CraneSystems

    Motor

    • High ISO classification according to FEM/ISO standards
    • Powerful motors with high duty cycle and number of switching operations
    • Standard fan cooling
    • Single-speed and frequency-controlled versions available as options
    • Optional temperature control by thermistor
  • Brake of the ST chain hoist from STAHL CraneSystems

    Brake

    • Low-maintenance, asbestos-free electromagnetic disc brake
    • Oversized braking torque
    • Long service life, brake pad status can be checked and measured
    • Brake completely enclosed, protected from humidity, vapours and dusts from the exterior; ensuring long-term reliable operation
  • Close-up of the patented chain drive for STAHL CraneSystems chain hoists

    Chain drive

    • Innovative patented chain drive
    • Anchorage and load-bearing components are directly integrated into the high-tensile grey cast iron
    • Simple inspection and replacement of the chain sprocket thanks to over-mounted shaft bearing
    • Enclosed chain guide
    • Reliable functioning even in demanding applications
    • Wear-resistant case-hardened chain sprocket in conjunction with optimised return sheaves; ensuring low wear on the chain
  • Open control box of the ST chain hoist from STAHL CraneSystems

    Standard control

    • All customary connecting and control voltages are available
    • Plug connection of control pendant and travel motor
    • Clear arrangement of contactors
    • As an option, available with direct control
    • As an option, available without control pendant and/or contactor control
  • ST chain hoist from STAHL CraneSystems in standard green-black finish

    Paint

    • Standard paint treatment as per RAL 6018 yellow-green and RAL 7021 greyish black
    • High-quality primer and top coats for standard applications
    • Off-standard paint treatment for outdoor use or corrosive ambient conditions
    • Other colours per RAL chart optionally available 
  • Toothed wheel of the ST chain hoist made by STAHL CraneSystems

    Overload slipping clutch and gear

    • The slipping clutch of the ST 10 to ST 60 is located in the oil bath.
    • Easily adjustable from the exterior
    • Precise response
    • No electronic limiting necessary
    • Various gear reductions available
    • Oversized helically geared gearbox
  • Load chains in various strengths for the ST chain hoist from STAHL CraneSystems

    Chain

    • Surface-hardened, galvanised and large dimensioned load chain
    • High case depth for long service life
    • High ISO classification according to FEM/ISO standards
    • Stainless steel or blackened manganese­phosphated load chains are available as option
  • Chain boxes of fabric, plastic and sheet steel for the ST chain hoist from STAHL CraneSystems

    Chain box

    • Large selection of chain boxes in plastic, sheet steel, textile or stainless steel
    • Available without chain box as an option

Options and features

Although they are already first-class in their standard design, you can make the hoists even safer, more economical and more convenient with a range of mechanical, electrical and electronic options. They simultaneously improve performance, prolong service life and make it possible to adapt the hoist individually to specific requirements.

Here are some of the options frequently used.

  • Red control pendant with EMERGENCY STOP pushbutton.

    Control pendant

    • Robust control pendant with EMERGENCY STOP palm button and control cable
    • All switching elements for hoist, cross, and long travel are 2-step
    • IP65 protection
    • Additional buttons, such as horn activation, can be easily fitted
  • Three different radio remote control units as pushbutton units and a joystick transmitter with controller.

    Radio remote control units

    • Flex-Wave pushbutton unit with protective cover and carry strap
    • VUE pushbutton units with feedback display
    • MLTX2 joystick transmitter with controller and carry strap
    • Optional battery chargers with standard rechargeable batteries
    • Robust, fibre-reinforced plastic housing, IP66 protection
    • Frequency ranges 433, 863 or 2,400 kHz
    • Also available in explosion-proof version
    • Other radio remote control units optionally available on request
  • SMC multi-controller for permanent load monitoring

    SMC Multicontroller

    • Continuous load monitoring by overload cut-off even if hoist is idling
    • Overload protection with ALC automatic load control
    • Load spectrum memory for load-related operating time summation
    • Operating data registration, e.g. operating hours, load spectrum, motor switching operations and load cycles
    • Data exchange with PC possible
  • Travel limit switch for mounting on a crab.

    Travel limit switch

    • Travel limit switch on crab available as option
    • Limiting for both directions of travel
    • Switchover from “fast/slow” (predisconnect)
    • Switch contacts designed for control current
    • IP66 protection
  • Operational hoist limit switch

    Operational hoist limit switch

    • Two versions are possible: cut-off in top hook position or cut-off in top and bottom hook position (stationary, push trolley, electric trolley)
    • Activated by the bottom hook block
  • Gear-type limit switch

    Gear-type limit switch

    • Various functions possible: e. g. routine operational cut-off in highest or lowest hook position or switching from “fast” to “slow” before the stops
    • IP55 protection, optionally IP66
  • Spring-steel chain guide for the ST chain hoist

    Spring-steel chain guide

    • Heavy high-tensile chain guide for rugged use
    • Enclosed chain guide
    • Extremely wear-resistant case-hardened chain sprocket
  • Bypass brake for the ST chain hoist

    Bypass brake

    • Second brake for increased safety
    • Identically dimensioned
    • Second brake acts in force transmission directly on the load, i. e. bypassed the slipping clutch
    • As an alternative to the bypass brake, a second hoist motor brake is available
  • Large-format load indicator with luminous red digits.

    Load display

    • SLD four-digit 7-segment load display, large format, luminous red
    • Available with various interfaces including CAN
    • Choice of 100 or 150 mm digit height
    • Combinable with the hoist’s overload sensor and the SMC multicontroller available as an option, no additional fixtures or load attachment devices are required, the headroom of the hoist remains unchanged
  • FMD1 slipping clutch test device

    FMD1 slipping clutch test device

    • Robust full metal design
    • Modern electronic test apparatus with field-proven sensor technology, high degree of accuracy ± 2 %
    • Test range up to 4,000 kg on one chain fall, suitable for chains up to 11.3 mm link thickness
    • Optionally available for STD and STK
    • Protector for evaluation device and internal test program
    • Simple intuitive handling

Download

Brochure

The ST Chain Hoist

32 pages

07.2021

Product information

Chain Hoists – ST

96 pages

07.2018 | Rev. 09.2019

More information

The largest range of chain hoists in the world for safe working loads up to 6,300 kg. Compact and easy to maintain.

ST chain hoist

The largest range of chain hoists in the world for safe working loads up to 6,300 kg. Compact and easy to maintain.

 ST chain hoist

The STF chain hoist is equipped with SFH Variospeed and Magnetek® IMPULSE®•G+ Mini Drive.

STF chain hoist

The STF chain hoist is equipped with SFH Variospeed and Magnetek® IMPULSE®•G+ Mini Drive.

 STF chain hoist

With headrooms reduced by 33 % and 60 % respectively, the [extra] short headroom trolleys achieve maximum hook paths.

Short headroom trolley

With headrooms reduced by 33 % and 60 % respectively, the [extra] short headroom trolleys achieve maximum hook paths.

 Short headroom trolley

The STD dual chain hoist was developed specifically for long material and loads that need to be picked up at two points.

Dual chain hoist

The STD dual chain hoist was developed specifically for long material and loads that need to be picked up at two points.

 Dual chain hoist

Custom solutions adapted individually to specific requirements are STAHL CraneSystems’ forte.

Custom solutions

Custom solutions adapted individually to specific requirements are STAHL CraneSystems’ forte.

 Custom solutions

ST Ex explosion-proof chain hoist for all protection zones, fields of use, branches of industry and regions.

Explosion-proof ST chain hoists

Explosion-proof chain hoists certified according to ATEX and IECEx for Zone 1, 21 or Zone 22.

 Explosion-proof ST chain hoists

A series of ST chain hoists are used in England for maintenance and replacement of railway tracks.

Engineering

Technicians develop individual custom and off-standard solutions from one of the largest product ranges available.

 Engineering